In this report we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks that you can use. If you have a dog that likes to bark, and particularly if your dog loves […]
In this report we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks that you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it is really very simple. All you have to do is take a cardboard cutting board and cut the cardboard into the http://blog.luxjoy.com/?p=245643 shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what type of paper plate which you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can make certain that nothing will leak once you place the mask on. Make sure that the edges are cut so the edges are not sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask on your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it could look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure the ears are flat and be sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you’ll need to do some sanding to make sure that it is safe on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.